PMMA Cast
PMMA that burns out without residue, especially for the casting technique. Burns 100% residue-free. The milling results are very dimensionally stable, typical of PMMA. Margins can be milled very thin and sharp. Bridges up to 16 units are possible without restriction. Can be milled dry or wet.
Further information
- Melting point: > 100°C
- Flash point: > 250°C
- Flexural strength: > 70 MPa
- Single crowns for casting
- Bridges up to 16 units for casting
- High strength
- High material homogeneity without defects in the material
- Very dimensionally stable milling results, razor-sharp edges,
Bridges up to 16 links possible without problems